Western Digital TV Live HUB User Manual page 26

To unlock a locked WD USB device:
A USB device must be unlocked for the media center to access its contents.
1. Navigate to the Home screen, and select the menu for the media content you
wish to access. It can be Music, Videos, or Photo.
2. In the Unlock your WD Drive screen, press
3. Use the navigation buttons
the on-screen keyboard. Select Submit, then press OK.
If a wrong password is entered, press
the correct password. If you enter the wrong password five consecutive times,
the USB drive is placed in a hold state. Press OK to close the error message.
Disconnect the USB drive. Power cycle and reconnect the USB drive and type in
the correct access password.
4. Once the USB drive has been unlocked, the menu bar for the selected media
type will appear. Press
media contents, then press OK.
Supported content for the selected media type will be displayed.
5. Use the navigation buttons
then press OK to start media playback.
Removing a USB Device
To prevent data loss, it is highly recommended that you first press the EJECT button
on the remote control before removing a USB device.
To remove a USB device:
1. Press the HOME button .
2. Press the EJECT button
3. Press / to select the USB device.
4. Press OK. With the
5. Disconnect the USB device from the media center.
to type in the USB drive access password in
/ to select OK, press OK, then type in
/ to choose a filter option for displaying supported
select the content you wish to access,
to
selected, press OK again.
WD TV Live Hub Media Center
/ to select OK, then press OK.
GETTING STARTED – 21
User Manual