Western Digital TV Live HUB User Manual page 217

Problem
The media center remote control does
not work.
FIRMWARE UPGRADE
The firmware upgrade recovery splash
screen is shown after you turned on
the media center or the media center
keeps rebooting to the splash screen.
Solution
• Press only one button at a time.
• Make sure the batteries are properly inserted.
• The batteries may already be drained out. Replace
batteries with new ones.
• Make sure that the path between the remote control
and the media center is not blocked.
The previous or current firmware upgrade process failed.
• Repeat the firmware upgrade process. Go to
page 209 for instructions.
• If you are still unable to update the system firmware,
perform a system reset. Go to page 200 for
instructions.
WD TV Live Hub Media Center
User Manual
SYSTEM MAINTENANCE – 212