Panasonic DMR-ES35VP Service Manual page 20

DMR-ES35VP / DMR-ES35VPC
Mode name
RAM Drive Last Error
Delete the Last Drive
Error
Laser power confirmation Drive state is judged based on difference
Turn on all FL/LEDs
S1 signal output
S2 signal output
Item
Description
RAM Drive error code display.
*For details about the drive error code, refer
to the Service Manual for the specific RAM
Drive.
Delete the Last Drive Error information stored
on the DVD RAM-Drive.
between laser power value at shipping and
present laser power value.
All segments of FL and all LEDs are turned
on.
Forcibly superimpose the S1 signal (approx.
4.5V DC) on the EE chroma signal, and check
the output on the S terminal.
Forcibly superimpose the S2 signal (approx.
2V DC) on the EE chroma signal, and check
the output on the S terminal.
FL display
1. Error Number is displayed for 5
seconds.
2. Time when the error has occurred
is displayed for 5 seconds.
DD: Day
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is displayed
for 5 seconds.
4. Last Drive Error (2/2) is displayed
for 5 seconds.
5. Error occurring Disc type is
displayed for 5 seconds.
6. Disc Maker ID is displayed for 5
seconds.
7. Factor of Drive Error occurring is
left displayed
If DVD-RAM disc in not inserted,
[NO DISC] is displayed.
If power value study was filed,
[ERROR] is displayed.
All segments are turned on.
20
Key operation
(Remote controller key)
Press [4] [2] in service mode.
When "INFO******" is
displayed, past 19 error histories
can be displayed by pressing [0] [1]
- [1] [9]
In case that the maker cannot be
identified, display is black out.
Press [9] [6] in service mode.
1. into RAM
Drive in service mode. (Other
media are assumed to be non-
correspondence.)
2. Press [4] [4].
Press [5] [1] in service mode.
Press [5] [2] in service mode.
Press [5] [3] in service mode.
being