Panasonic DMR-ES35VP Service Manual page 18

DMR-ES35VP / DMR-ES35VPC
7.1.3. (DVD) Service Modes at a glance
Service mode setting: While the power is off, press [STOP], [VHS to DVD DUBBING] and [OPEN / CLOSE] simultaneously for
five seconds (OPERATION SELECT should be set to DVD).
Mode name
Release Items
Error Code Display
ROM Version Display
White Picture Output
Magenta Picture Output Magenta picture is output with Component
RTSC Return in XP
(A & V)
Item
Description
Item of Service Mode executing is cancelled.
Last Error Code of U/H/F held by Timer is
displayed on FL.
*Details are described in "7.1.1. (DVD) Self-
Diagnosis Functions".
1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version
(displayed for 5 sec.)
6. VHS Microprocessor version
(displayed for 5 sec.)
7. VHS ROM correction version
(left displated)
White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
L1 input signal is encoded (XP), decoded
(XP) and output decoded signal to external
without DISC recording and DISC playback.
FL display
If any error history dose not exist,
[F00] is displayed.
'''' are version displays.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Switch Interlace/Progressive
Audio 44.1 kHz/ 48 kHz Switch
18
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Press [1] [3] in service mode.
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.