Parallelism Of The Feed Dog; The Sideways Setting Of The Feed Dog; The Feed Dog Height - Husqvarna 1200 Service Manual

The setting of the feed dog
15 I The parallelism of the feed dog
Requirement A
The feed dog should be parallel with the grooves in the
stitch plate.
Adjustment
Set the feed dog in its highest position.
Remove the stitch plate and loosen the screws (A) which
hold the feed dog, fit the stitch plate and adjust the feed
dog until it lies parallel with the grooves in the stitch plate.
Then remove the stitch plate without moving the feed dog.
Tighten the screws and check that the feed dog is positioned
correctly in the stitch plate.
16 II The sideways setting of the feed dog
Requirements B, model 1050/1070/1090/1100
The feed dog should move freely in the grooves of the
stitch plate (sideways).
Requirements B,model 1200
At side feeding the feed dog should move
freely in both side positions
(goes for all 4 feed dog rows).
Adjustment
Turn the nut (B) until requirements is reached.
17 III The feed dog height
Requirements
The feed dog should be between
1.0 and 1.1 mm above the stitch plate
when the feed dog is
in its highest position.
Adjustment
Set the feed dog at its highest position.
Put setting gauge 411 49 93-01 above the feed dog.
Loosen nut (A) and turn the screw (B) until requirements is reached.
34 Husqvarna service manual 104 72 30-26
SEWKNITWORLD