Reassembly And Installation - Suzuki LT-Z90K7 2007 Service Manual

5-24 CHASSIS

REASSEMBLY AND INSTALLATION

STEERING KNUCKLE ARM
• Install the knuckle arm bush with the special tool.
09924-84510: Bearing installer set
• Apply SUZUKI RESISTANCE GREASE to the knuckle arm
bushes, dust seals and spacer.
• Install the spacer and dust seals.
99000-25160: SUZUKI RESISTANCE GREASE
FRONT SUSPENSION
• Tighten the front suspension arm bolts to the specified torque.
Front suspension arm pivot nut:
• Tighten the front shock absorber bolts to the specified torque.
Front shock absorber upper bolt: 50 N·m
Front shock absorber lower bolt: 50 N·m
• Tighten the knuckle arm nut to the specified torque and install
the cotter pin.
Steering knuckle arm nut: 60 N·m (6.0 kgf·m, 43.5 Ib-ft)
The removed cotter pin must be replaced with a new
one.
(or equivalent)
65 N·m (6.5 kgf·m, 47.0 lb-ft)
(5.0 kgf·m, 36.0 Ib-ft)
(5.0 kgf·m, 36.0 Ib-ft)