Pentax WG-10 Operating Manual page 29

* A12 changes as follows depending on the [Eye-Fi] setting in
[W Setting] menu.
During Eye-Fi communication. The camera is communicating or
searching for the access point when [Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not communicating
when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. [Eye-Fi] is set to P (off).
Eye-Fi version error. The version of the Eye-Fi card is out of date.
* A17 depends on the [D-Range Setting] setting in the [A Rec. Mode]
menu.
When [Highlight Correction] is set to O
P
When [Shadow Correction] is set to O
Q
When [Highlight Correction] and [Shadow Correction] are both
O
set to O
If [Highlight Correction] and [Shadow Correction] are both set to
P (Off), nothing appears in A17.
* B1 and B2 are only displayed when the shutter release button is
pressed half-way.
* When the shooting mode is b (Auto Picture) and if you press the
shutter release button halfway, the automatically selected shooting
mode appears in A1 even when "No Info" is selected (p.75).
* Some indications may not appear depending on the shooting mode.
* When there is an area on the screen that is overexposed it appears
white, the indicated area blinks red as a warning. Similarly, when there
is an area that is underexposed it appears black, the indicated area
blinks yellow as a warning.
27