Pentax WG-10 Operating Manual page 52

6
Press the four-way controller
(3).
The frame moves to [Date].
1
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller
(23) to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in step 4, the
setting switches between am and pm
corresponding to the time.
9
Press the four-way controller
(3) to select [Settings
complete].
10
Press the 4 button.
This confirms the date and time.
If you press the 4 button in step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the 3 button. In this case, the [Initial Setting] screen will
appear next time you turn the camera on.
50
Date Adjustment
mm/dd/yy 24h
Date Format
Date 01/01/2013
Time 00:00
Settings complete
MENU Cancel
Date Adjustment
Date Format mm/dd/yy 24h
Date 01/01/2013
Time 00:00
Settings complete
MENU Cancel
Date Adjustment
mm/dd/yy 24h
Date Format
Date 01/01/2013
Time 00:00
Settings complete
MENU Cancel OK OK