Pentax WG-10 Operating Manual page 43

1
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide
the cover towards 2 and open it towards 3.
2
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing toward the front of the
camera (the side with the lens).
Push the card in all the way. Images and sound may not be recorded
correctly if the card is not inserted all the way.
3
Close the battery/card cover.
While lightly pressing the battery/card cover in the opposite direction
indicated by 2, slide the cover. The cover clicks to confirm that it is
securely closed.
To Remove the SD Memory Card
1
Open the battery/card cover.
2
Push the card into the SD Memory Card socket to eject
it.
Pull the card out.
If the battery/card cover is not locked securely when you close it, water,
sand, or dirt may get into the camera.
SD Memory Card
socket
Battery/card cover
SD Memory Card
1
41