Table of Contents
Advertisement
12.
Replace the lamp cover on the projector.
13.
Tighten the screw(s) that secures the lamp cover.
•
Loose screw may cause a bad connection, which could result in
malfunction.
•
Do not over tighten the screw.
14.
Connect the power and restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
15.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER.
The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning
message is displayed asking if you want to reset the lamp timer. Highlight Reset and
press MODE/ENTER. The lamp time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
1
2
Maintenance
53
Advertisement
Table of Contents
