Wired Lan - BenQ MX842UST User Manual

Function
Standby
Settings
Network
Settings
Reset All
Settings
46 Operation
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
Microphone
Selecting On enables the function. The projector can output the
microphone signal when it is in standby mode and all the necessary
equipment is correctly connected. See
projector" on page 18
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER-1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power consumption.

Wired LAN

See BenQ Network Projector Operation Guide
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected
by AMX controller.
MAC Address
Displays the mac address of this projector.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Phase, H. Size, User 1,
User 2, Reference Mode, Language, Projector Installation, High
Altitude Mode, Security Settings, Network Settings and Baud Rate.
Description
"Playing sound through the
for details.
"Connection" on page 17 for how
/
"Connection" on page 17
for details.
to