Connecting Video Source Devices; Playing Sound Through The Projector - BenQ MX842UST User Manual

Table of Contents

Advertisement

If you wish to use this connection method when the projector is in standby mode, make sure the
Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See
on page 46

Connecting video source devices

You need only connect the projector to a video source device using just one of the
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the video source device as described below:
Terminal name
HDMI
Component Video
S-Video
Video
Connecting audio
The projector has built-in speaker(s) which are designed to provide basic audio
functionality accompanying data presentations for business purposes only. They are not
designed for, nor intended for stereo audio reproduction use as might be expected in
home theater or home cinema applications.
The built-in speaker(s) will be muted when the AUDIO-OUT jack is connected.
The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See
"Connecting audio" on page 18
If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, check that the video source device is turned on and operating correctly. Also check
that the signal cables have been connected correctly.

Playing sound through the projector

You can make use of the projector (mixed mono) speaker(s) in your presentations, and
also connect separate amplified speakers to the AUDIO OUT socket of the projector.
If you have a separate sound system, you will most likely want to connect the audio output
of your Video source device to that sound system, instead of to the mono audio projector.
You can also use a microphone to output the sound through the projector speaker(s).
Once connected, the audio can be controlled by the projector On-Screen Display (OSD)
menus. See
18
Connection
for details.
Terminal appearance
for details.
"Audio Settings" on page 45
Picture quality
for details.
"Standby Settings"
Best
Better
Good
Normal

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw843ust

Table of Contents