Motorola MC9500-K User Manual page 25

Lift the SIM card holder door.
3.
Lifting the SIM Cover
Figure 1-6
Insert the SIM card, as shown in
4.
notch facing up.
Card Notch
Inserting the SIM Card
Figure 1-7
Close SIM card holder door and slide to the right to lock into place.
5.
Align the SIM card cover over the access hole and press down until it snaps into place.
6.
Install the battery.
7.
After completing initial MC9596 setup or after replacing a SIM card:
8.
Press the red Power button.
a.
On the Today screen, tap Wireless Manager.
b.
Ensure Phone is on.
c.
Press the red Power button to suspend the MC9596.
d.
Perform a warm boot. See
e.
Make a call to verify cellular connection.
f.
NOTE For detailed information about WWAN activation and settings, refer to the MC9500-K Series Mobile Computer
Integrator Guide.
Figure 1-7 into the holder door with the contacts facing down and the card
Resetting the MC9500-K on page
Getting Started
3-3.
1 - 5