Previewing Chases In Live Mode; Additional Functions Of The Lc2412; Locking Program Mode; Putting The Output On Hold - Behringer Eurolight LC2412 User Manual

6.4 Previewing chases in live mode

You can use the live mode for chases as well. More detailed
information about live mode can be found in chapter 4.5.
To preview chases in live mode, do the following:
1. Activate the live mode by pressing the LIVE switch
2. Press the NUMBER key
stage as long as you keep the key pressed.
3. To quit live mode, simply press the LIVE switch again.
7. ADDITIONAL FUNCTIONS
OF THE LC2412

7.1 Locking program mode

To avoid having your setups altered by unauthorized persons,
you can block the program mode of your console. There are
several blocking functions available.
The LC2412 can run only in preset mode. Recalling memories
is not possible. Chases can still be replayed.
The console operates normally, but modifying programmed
memories or chase steps is possible only after the console is
unblocked.
1. Keep the SOFT A and SOFT B keys pressed and simultanously
press the FLASH key for channel 1 (far left).
2. Now you can select various menues with the DATA wheel.
3. After having selected the desired mode, you can block it/
unblock it by pressing the SOFT B key.
4. Exit the programming procedure by pressing QUIT.

7.2 Putting the output on hold

If you want to freeze the current console output while you can
make another setup, you can use the HOLD key for this purpose.
1. Press the HOLD key
Fig 7.1: Display “put console output on hold”
2. Implement a modification, as desired (recalling and pro-
gramming memories and presets is done as described in the
respective chapters of this manual).
3. To start a new chase, select this chase as usual by pressing
the NUMBER key and turning the DATA wheel. The chase
selected will be indicated on the control lights as long as you
keep the key pressed.
To softly crossfade between setups, pull the MAIN fader all
the way down and then all the way up. Moving up the fader
crossfades between the former setup and the new one.
The hold mode is automatically deactivated when the MAIN
fader reaches its upper-most position.
By using the SOFT B key, you can select “CANCEL” in the
display, so that you quit a mode. In doing so, the new setup is
faded in abruptly.
. The chase is previewed on the
.

7. ADDITIONAL FUNCTIONS OF THE LC2412

EUROLIGHT LC2412

7.3 Special channels

Both special channels
effects independently from other settings of the EUROLIGHT
LC2412. Fog machines, color changers or disco ball motors are
such effects. You can program special activation modes for
these effects.
.
s : The SPECIAL key acts as a switch. Pressing
and releasing the key activates the fog machine (or another
function). To deactivate it, press and release the SPECIAL
key again.
s : The SPECIAL key keeps a function active as
long as you keep the key pressed. As soon as you let go of
the SPECIAL key, the function assigned to this channel is
again deactivated.
s : Similar to flash mode, a function is activated only
as long as the SPECIAL key is kept pressed. However, in
addition to this, all other functions are also temporariliy
disabled.
To program the various modes, do the following:
1. Press the UTILITY 2 key
2. Select the “MORE” option using SOFT B.
3. Select the “SELECT SPECIAL” option on the display by using
the SOFT A key
4. SPECIAL 1 key is now labeled with KEY 1 (SPECIAL 2: KEY
2). To change the mode of this key, keep the SOFT A key (for
KEY 1; SOFT B for KEY 2) pressed and select the desired
option using the DATA wheel.
5. Confirm your selecting with the QUIT key
the main menu.
Special channels are labeled console channels 25 and 26
when assigned to DMX channels (also see chapter 8.2.2.)

7.4 Theater mode

You have the option to store a long sequence (99 steps) so
that you can define an
This way, you can uploade a framework for a complete theater
piece into the chase storage, and then expand it with presets
and memories. Therefore, think of theater mode as a special kind
of chase programming. To let time sequences be flexibely
configured, subsequent steps are not controlled automatically
or via a sound signal source. Instead, they are triggered
individually by hand.
To work in theater mode, the following conditions must be met:
s Chase control via the internal beat generator (RUN) must be
deactivated,
s Chase control via an external audio signal (SOUND) must be
deactivated,
s MANUAL must be deactivated,
s INSERT also has to be deactivated.

7.4.1 Activating theater mode

To activate theater mode, do the following:
1. Press the UTILITY 1 key.
2. Using the SOFT B key, select the “MORE” option.
3. After that, you can activate/deactivate theater mode using
the SOFT B key.
4. To go back to the main menu, press the QUIT key. When
theater mode is active, a “T” is shown in the display.
and are well-suited activating
.
.
and go back to
crossfade time for step.
17