Handlebar Switches - Yamaha FZ8NA Owner's Manual

Self-diagnosis device
1
1. Error code display
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the engine trouble warning light
will come on and the display will indi-
cate an error code.
If the display indicates any error codes,
note the code number, and then have a
Yamaha dealer check the vehicle.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
1
2
3
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch " "
Right
ECA11590
1. Engine stop switch "
2. Start switch " "
EAU12348
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
/ "
/ "
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
1
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
2
/ "
4-8
EAU12400
/ "
" for the high
" for the low beam.
EAU12460
/ "
". To signal a left-hand
". When re-
EAU12500
"
EAU12660
/ "
" before starting
" to
4