Front Wheel - Yamaha FZ8NA Owner's Manual

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
3
2
1
1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24360 2. Lift the front wheel off the ground
according to the procedure in the
previous section "Supporting the
EAU49831
motorcycle".
3. Remove the brake hose holder on
EWA10821
each side by removing the bolt and
nut.
1
2
1. Brake hose holder
2. Bolt and nut
4. Remove the brake caliper (togeth-
er with the reflector) on each side
by removing the bolts. NOTICE:
Do not apply the brake after the
brake calipers have been re-
moved, otherwise the brake
pads will be forced shut.
1
1. Brake caliper bolt
2. Brake caliper
3. Reflector
5. Pull the wheel axle out, and then
To install the front wheel
1. Lift the wheel up between the fork
2. Insert the wheel axle.
3. Lower the front wheel so that it is
4. Install the brake calipers (together
[ECA11051]
7-38
2
remove the wheel.
legs.
on the ground, and then put the
sidestand down.
with the reflectors) by installing the
bolts.
3
EAU49841
7