Pair Mode; Usb Bluetooth Adapter; Pair Usb Adapter Again; Nfc Pairing - Plantronics Voyager 8200 UC User Manual

Pair mode

USB Bluetooth adapter

Pair USB adapter again

1
2
3

NFC pairing

1
2
Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
USB LEDs What they mean
Red and blue flashes Pairing
Solid Blue Pairing successful; Connected
Blue flashes On a call
Solid red Mute active
Purple flashes Streaming music/media from computer
Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your
computer to recognize it.
Put your headphones in pair mode.
Put your Bluetooth USB adapter into pair mode by gently pressing and holding the pair button
with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and the Bluetooth USB adapter LED is
solid blue.
Ensure NFC is on and your phone's display is unlocked.
Tap and hold the headphones to the phone's NFC tag location until NFC pairing completes. If
necessary, accept the connection.
TIP
Keep an eye on your Smartphone's screen for prompts to start and accept the pairing process.
L R
NOTE
The headphone's NFC tag is located on the outside of the left ear cup. Phone NFC tag locations
vary.
5