Canon DADF-Q1 Service Manual page 35

Inch-Configuration
Default size
STMT
LTRR
FOOLSCAP
LGL
LTR
279.4X431.8 (11"X17")
A size outside of the above ranges will be identified as a non-default size.
Inch/A- and Inch/AB-Configuration
Default size
B5R
A5
A4R
STMT
LTRR
FOOLSCAP
LGL
B5
B4
LTR
279.4X431.8 (11"X17")
A4
A3
A size outside of the above ranges will be identified
as a non-default size.
b.Slide Guide Lock
The DADF is equipped with a slide guide lock so that the slide guide will not slide beyond the width of an A4/A3 sheet.
To use an original wider than 297 mm, remove the slide guide lock (up to 305 mm; however, the feeding length must be 432 mm or less).
Original length Original width
120 to 180 213 to 220.9
259 to 309
310 to 343
343 to 396
196 to 256 274.4 to 284.4
412 to 472
T-2-6
Original length Original width
237 to 297 170 to 187
129 to 189 205 to 213
277 to 337
120 to 180 213 to 220.9
259 to 309
317 to 343
343 to 396
162 to 222 252 to 262
344 to 404
196 to 256 274.4 to 284.4
412 to 472
190 to 250 292 to 302
400 to 460
Chapter 2
(unit: mm)
(unit: mm)
2-13