Omron V670-H11 User Manual page 55

♦ Model V670-H51/H51Q
• Installation
When installing the antenna, do not apply large shock to it with a hammer or other tool. Shock may damage the antenna or may
reduce its water resistance.
• Tightening strength
Tighten the nuts to the torque specified below. When tightening the nuts, be sure to use toothed lock washers.
♦ Model V670-H51
♦Model V670-H51Q
M18 nuts attached to products
(Tightening torque: 70 N•m or less)
M18 nuts attached to products
(Tightening torque: 2 N•m or less)
3-2 Antenna
3-17