Setting Up A Position Report Ringer - Standard Horizon MATRIX AIS/GPS GX2200E Owner's Manual

8.8.7 Setting up a Position Report Ringer

The GX2200E has the capability to turn off the position report ringer.
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " DSC SETUP "
menu.
3. Press the
BEEP " with the CH knob.
4. Press the
Report " with the CH knob.
5. Press the
with the CH knob.
6. Press the
selected setting.
7. Press the
To re-enable the ringer tone, repeat the above procedure, rotating the CH
knob to select " On " in the step 5 above.
Page 76
key until " Setup
CALL
MENU
soft key, then select " DSC
soft key, then select " POS
soft key, then select " Off "
soft key to store the
soft key several times to return to radio operation.
GX2200E