Table of Contents
Advertisement
9.8.4 Saving the Reported Position as a Waypoint
The HX870E can save a position report call in the radio's memory as a waypoint.
1. After the position report call has been
received, press the [SAVE] soft key.
2. If you want to change the name of the
waypoint, press the CH▼/CH▲ key to select
"NAME", then press the [SELECT] soft key.
3. Enter the name of the waypoint you want to
reference in the directory. For details, refer to
"9.5.1 Setting up the Individual / Position
Call Directory".
4. Press the CH▼/CH▲ key to select "SAVE",
then press the [ENTER] soft key to save the
waypoint into memory.
5. Press the [OK] soft key to return to the posi-
tion report display.
Navigating to a Saved Waypoint
Refer to section "10.1 WAYPOINT OPERATION" for details.
9.8.5 Setting up a Position Report Ringer
The HX870E has the capability to turn off the position report ringer.
1. Press the MENU key to display "MENU".
2. Press the CH▼/CH▲/◄/► key to select
"SETUP", then press the [SELECT] soft key.
3. Select "DSC SETUP" menu with the CH▼/
CH▲ key.
4. Press the [SELECT] soft key, then select
"DSC BEEP" with the CH▼/CH▲ key.
5. Press the [SELECT] soft key, then select
"POS REPORT" with the CH▼/CH▲ key.
6. Press the [SELECT] soft key, then select
"OFF" with the CH▼/CH▲ key.
7. Press the [SELECT] soft key to store the
selected setting.
8. Press the CLR key to return to radio opera-
tion.
To re-enable the ringer tone, repeat the above procedure, pressing the CH▼/
CH▲ key to select "ON" in the step 6 above.
Page 64
RX POS REPORT
987654321
Horizon
SAFETY
CATEG:
24 ° 25.975
POS:
N
118 ° 59.456
W
12:
56
POS TM:
AM LOC
NAME:
001WPT----------
00:05
SINCE:
POSITION:
SAVE
INFO
QUIT
WAYPOINT DIR.
NAME
S
---------------
BACK
A
B
C D E F G H I J K L
M
N
O P Q R
S
T U V W X
NAME:
Y
Z
1 2
3 4 5 6 7 8 9 0
Horizon----------
a&
Delete
POSITION:
BACK
FINISH
SELECT
RX POS REPORT
987654321
Horizon
SAFETY
CATEG:
BACK
24 ° 25.975
POS:
N
118 ° 59.456
W
12:56
POS TM:
AM LOC
Saved
OK
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
DSC SETUP
GPS SETUP
GROUP DIR.
ATIS SETUP
AUTO POS POLLING
AUTO POS TIME
BACK
CH SWITCH TIMER
NO ACT TIMER
POS FIX WAIT
DSC BEEP
INDIVIDUAL
BACK
SELECT
GROUP
ALL SHIPS
DSC BEEP
POS REQUEST
POS REPORT
POS REPORT
OFF
BACK
ON
BACK
ENTER
WAYPOINT DIR.
24 ° 25.975
N
118 ° 59.456
W
SAVE
SELECT
WAYPOINT DIR.
24 ° 25.975
N
118 ° 59.456
W
SAVE
ENTER
SETUP
SELECT
DSC SETUP
DSC BEEP
ON
ON
ON
ON
ON
SELECT
HX870E
Advertisement
Table of Contents
