SATO HT200e Operator's Manual page 67

SECTION 4 FREE MODE
：
Based on the field designation, the setting for copy functions will be explained in the following.
10: Normal
11: Normal/Table data
12: Normal/Sequential number
20: Price/Normal
21: Price/POP
70: Bar code/HRI is available
71: Bar code/HRI is NOT available
A calendar field can not be copied.
For Normal/Table data, a copy can not be received.
C opy setting
Digit Designated
position (s) item
22 Copy action
23, 24 Copy 1
25, 26
27, 28
29, 30
31, 32 Copy 2
33, 34
35, 36
37, 38
39, 40 Copy 3
41, 42
43, 44
45, 46
Page 4-4
0: No copy
1: Copy
2: Receive a copy
Note: The information below is only available when the Copy
action 1 is selected.
01 to 32: First position to specify the range of copying characters
01 to 32: Number (or digits) of characters to be copied
01 to 29: Field number for characters to be sent
01 to 32: Position that specified characters to start copying
01 to 32: Fist position to specify the range of copying characters
01 to 32: Number (or digits) of characters to be copied
01 to 29: Field number for characters to be sent
01 to 32: Position that specified characters to start copying
01 to 32: Fist position to specify the range of copying characters
01 to 32: Number (or digits) of characters to be copied
01 to 29: Field number for characters to be sent
01 to 32: Position that specified characters to start copying
Description
SATO HT200e