SATO HT200e Operator's Manual page 51

PROCESS ON THE SCREEN FOR INDICATION OF ROM VERSION
Ｔ Ｅ Ｓ Ｔ Ｐ Ｒ Ｉ Ｎ Ｔ
1
[ ]
←
Ｂ Ａ Ｔ Ｔ Ｅ Ｒ Ｙ Ｃ Ｈ Ｅ Ｃ Ｋ
2
[ ]
←
Ｒ Ａ Ｍ Ｂ Ａ Ｃ Ｋ Ｂ Ａ Ｔ Ｔ Ｅ Ｒ Ｙ
3
[ ]
←
Ｃ Ａ Ｒ Ｄ Ｂ Ａ Ｔ Ｔ Ｅ Ｒ Ｙ
4
[ ]
←
Ｒ Ｏ Ｍ Ｖ ｅ ｒ ．
5
SATO HT200e
9 + Power "ON"
１ Ｗ ０ ０ ０ ０
SECTION 2: INSTALLATION AND SETUP
Press [ENTR], so that it starts test print.
Press [ ], so that it goes to the process No. 2.
→
[ ]
→
Press [ENTR], so that it displays voltage in battery.
Press [ ], so that it returns to the process No. 1.
←
Press [ ], so that it goes to the process No. 3.
→
[ ]
→
Press [ENTR], so that battery level (or remaining
fuel) can be indicated for RAM's back-up.
Press [ ], so that it returns to the process No. 2.
←
Press [ ], so that it goes to the process No. 4.
→
[ ]
→
Press [ENTR], so that battery level (or remaining
fuel) can be indicated for card's back-up.
Press [ ], so that it returns to the process No. 3.
←
Press [ ], so that it goes to the process No. 5.
→
[ ]
→
ROM version can be displayed:
[ENTR] is invalid.
Press [ ], so that it returns to the process No. 4.
←
Page 2-33