Connect The Power Cord - Brother MFC-9970CDW Quick Setup Manual

4

Connect the power cord

and telephone line
IMPORTANT
DO NOT connect the interface
cable yet.
a
Connect the AC power cord to the machine,
and then plug it into an electrical socket.
b
Remove the label covering the machine's
power switch, and then switch the machine on.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
(Example for U.K.)
IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
electrical socket, you can protect yourself
from potentially hazardous electrical
conditions on the telephone network by
keeping the power cord connected to your
machine when you connect it to a telephone
line. Similarly, you can protect yourself when
you want to move your machine by
disconnecting the telephone line first and then
the power cord.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
(Example for U.K.)
1 Extension telephone
2 External telephone
1
2
5