Connect The Power Cord; Install The Ink Cartridges; Choose Your Language - Brother DCP-J525W Quick Setup Manual

3

Connect the power cord

WARNING
The machine must be fitted with an earthed
plug.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
Note
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
4

Choose your language

a
Press s or t to display your language and
press the desired language.
b
Press Yes or No.
Note
If you set the wrong language, you can change it
after setting the date and time. (uuAdvanced
User's Guide: Changing LCD language)
4
5

Install the ink cartridges

CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
Note
Make sure you install the Introductory ink
cartridges included with your machine first.
a
Make sure that the power is turned on.
The LCD will show No Ink Cartridge.
b
Open the ink cartridge cover a.
c
Remove the orange protective part a.
Note
Do not throw away the orange protective part.
You will need it if you transport the machine.
1
1