Brother MFC-9970CDW Quick Setup Manual page 22

For Wireless Network Users
17
Confirm your network environment (Infrastructure Mode)
The following instructions will offer two methods for installing your Brother machine in a wireless network
environment.
Note
To setup your machine in any other wireless environment, you can find instructions in the Network User's
Guide.
a
Configuration using Wi-Fi Protected Setup or AOSS™ (one push configuration)
If your WLAN access point/router supports automatic wireless mode
(Wi-Fi Protected Setup or AOSS™)
Now go to
b
Manual configuration from the control panel
If your WLAN access point/router does not support Wi-Fi Protected Setup or AOSS™, write down
the wireless network settings of your WLAN access point/router.
IMPORTANT
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Network name (SSID/ESSID)
For example:
Network name (SSID/ESSID)
HELLO
Note
• If you do not know this information (Network Name (SSID/ESSID) and Network Key), you cannot
continue the wireless setup.
• How can I find this information (Network Name (SSID/ESSID) and Network Key)
1. You should see the documentation provided with your WLAN access point/router.
2. The initial network name could be the manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator or internet provider.
Now go to
22
Network Key
Network Key
12345678
page 23
page 24