Rear Panel - Asus RT-G32 User Manual

Rear panel

Label
ANTENNA
WPS
Reset
WAN
LAN1-LAN4
DC 1V
8 RT-G
Adjust the antenna manually to get a better signal reception
Press this button to launch the Wi-Fi Protected Setup (WPS).
Press for three seconds to restore to the factory default
settings.
Connect an RJ-45 Ethernet cable to this port to establish
WAN connection.
Connect RJ-45 Ethernet cables to these ports to establish
LAN connection.
Insert the DC adapter into this port to connect your router to
a power source.
Description
Chapter 1: Knowing your wireless router