Rear Panel - Asus RT-N12 C1 User Manual

Rear panel

Label
WAN
LAN1-LAN4
DC IN
WPS
Restore
Item
Use this selector to choose an operation mode:
Router (IP Sharing mode): In the Router mode, the wireless
router connects to the Internet via PPPoE, Automatic IP, PPTP,
LTP, or Static IP, and provides you with wireless radio signals.
The NAT, firewall, and IP sharing services for LAN clients are
enabled.
Operation
Repeater: In this mode, the wireless router extends your wireless
mode
network coverage and provides you with higher quality wireless
selector
radio signals. The NAT, firewall, and IP sharing services are
disabled.
Access Point (AP): In this mode, the wireless router receives
the WAN IP address from the router connected to the WAN port
and provides you with wireless radio signals. The NAT, firewall,
and IP sharing services are disabled.
Chapter 1: Knowing your wireless router
Connect an RJ-5 Ethernet cable to this port to establish
WAN connection.
Connect RJ-5 Ethernet cables to these ports to establish
LAN connection.
Insert the AC adapter into this port to connect your router
to a power source.
Press this button to establish wireless connection.
Press this button for more than five seconds to restore the
system to its factory default settings.
ROUTER AP
REPEATER
Description
Description
Operation mode
selector
RT-N1 C1
9