LINK (Link Status)
Operation Mode
OFF
ON
Blinking quickly
Blinking slowly
1..2 Rear panel features
The rear panel contains the Ethernet, the DC port, and the Reset button.
Label
ETHERNET
RESET
DC
Chapter 1 - Introduction
AP/Repeater/Bridge/
Gateway
Client not associated
Client associated
--
--
The Ethernet port connects to an Ethernet device such as to a
switch or to a router.
Press the Reset button to restore to factory default settings.
The DC port connects to the power adapter.
ASUS 802.11g Access Point
Client
Not associated to AP
Associated to AP with
strong signal
Associated to AP with better
signal
Associated to AP with weak
signal
Description
13