Operation Chart - Panasonic Panafax UF-9000 Operating Instructions Manual

Getting To Know Your Machine

Operation Chart

■ Quick Operation Chart
Turn the Power
Switch on the
Left side of the
machine to the
Adding Paper
ON position.
Exit Tray
● Adding Paper (Paper Trays: Tray-1 and Tray-2)
For Tray-1
1
Paper Tray
1 For Tray-2 (Option)
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
1
Face Up
14
1
From
ADF
Original Guides*
or
Adjust to the
original's width
*
Hold the guides by the center
when adjusting the width.
From
Platen
Pull the Exit Tray
until it stops.
INV: Invoice, LTR: Letter
The Paper Level Indicator moves down
as paper level declines, warning you
that the paper is running out.
Paper Level Indicator (Orange)
Full
Empty
NOTE: When "ADD PAPER" message appears on
the display, Tray-1 or Tray-2 have either ran
out of paper or are not closed firmly (see
page 21). Replenish the paper in the tray(s)
or ensure that the tray(s) are closed.
1 Feed 1 sheet of paper at a time.
Paper Weight: 16 - 44 lb
2
Adjust the width guides.
Incorrect adjustment may cause
the paper to wrinkle, misfed or
skew.
NOTE: For envelope printing refer
to the Panasonic-DMS
Operating Instructions
manual included on the CD.
Face Up
Tray
(Max. 50 Letter
size originals)
Original Guides
Face Down
● If the original is not positioned
● For originals smaller than Invoice
2
Until it stops
Push
Do not press Start until the LCD displays
the "paper size" with an "
" " key to select another size.
2
properly, a portion of the original
may not be copied.
size, position the original within
the Invoice area and select
Invoice.
2
Tray-1 Max. Level Indicator
2
Tray-2 Max. Level Indicator
". Press the