Audio Setup Menu; Others Setup Menu; Set The Anti-Theft Code - Clarion VX404E Owner's Manual

DVD Wide Screen Mode: Set the DVD wide screen
mode On or Off.
Dimmer: Set Dimmer value from 0 to 20.
Dimmer Mode: There are three options, Day, Night
and Auto.

Audio Setup Menu

This menu includes: Balance, Fader, Beat EQ,
Subwoofer Ctrl, Subwoofer Phase, High Pass Filter,
Low Pass Filter and Magna Bass EX.
Balance: Choose the desired volume for left and right
speaker.
Fader: Choose the desired volume for front and rear
speaker.
Beat EQ: Choose the desired mode: Bass Boost,
Impact, Excite, Custom and OFF.
Subwoofer Ctrl: Choose the desired subwoofer gain
from 0 to 14.
Subwoofer Phase: Choose the Subwoofer Phase
normal or reverse.
High Pass Filter: Choose the frequency about the
high pass filter or enable. The frequencies include
60Hz, 90Hz and 120Hz.
Low Pass Filter: Choose the frequency about the low
pass filter or enable. The frequencies include 60Hz,
90Hz and 120Hz.
Magna Bass EX: Choose the loudness On or Off.

Others Setup Menu

48
This menu include: Set Password, Parental Control,
Audio Language, Subtitle Language, PTY Language,
Blinking LED, Screen Calibration and Factory Default.
Set Password: Set the password for DVD parental
control.
Parental Control: Set the rating of the age. It contains
Kid Safe/G/PG/PG- 13/PG-R/R/NC- 17/Adult.
Audio Language: Set the Language for DVD Audio.
Subtitle Language: Set the Language for DVD subtitle.
PTY Language: Set the Language for PTY text.
Blinking LED: Set blinking LED On or Off.
Screen Calibrate: The function of it is to select the TS
Calibrate YES or NO.
Factory Default: The function is to select to load
factory default or not.

Set the Anti-Theft code

1. If your unit is unlocked, hold the [
more than 2 seconds, then the Anti-Theft setting
mode will display. Users can change anti-theft
code.
Touch [YES] button, the numerical keypad is
displayed. Enter the new password twice, then anti-
theft code is set and your unit is secured.
When the Anti-theft is "On", you need enter correct
Anti-theft code to turn the unit on. If you enter
wrong code three times, the unit is locked, and must
be unlocked by the professionals.
2. If your unit is secured, hold the [
than 2 seconds, then the Anti-Theft setting mode
will display. The numerical keypad is displayed,
enter the right code to unlock.
Note:
If the anti-theft code is lost or forgotten, a charge will
be incurred at the owner's expense by a Clarion service
station to unlock the VX404E.
] button
] button more