Ipod Audio Bluetooth Mode - Clarion VX404E Owner's Manual

Switch to Previous/Next Track
• Press [ ] or [ ] button during playback to play
previous /next track.
• Pressing [ ] button starts playback from the
beginning of the next track.
• Pressing [ ] button starts playback from the
beginning of the current track; when this button is
pressed again within about 5 seconds, playback
starts from the beginning of previous track.
beginning of the current track.
Fast Forward /Fast Backward
Press [ ] or [ ] button and hold more than 2
seconds to start fast backward or fast forward during
playback. Release the button will continue playback
with normal speed.
Note:
*The fast forward and fast backward speed may differ
depending on the audio files.
Repeat Playback
* The repeat set as the factory default is "Repeat Off".
Touch the Repeat [
One", again for "Repeat All", again for "Repeat Off".
Note:
The operation in iPod video mode is same as iPod
Audio mode. Please refer to the iPod Audio Mode
operation.
Note:
• Video is not displayed when the automobile is moving.
• Image data may not be played back according to the
status of the iPod/iPhone
• The volume setting of video data is relatively lower than
audio data. Be sure to lower the volume setting before
switching to the other mode.
• Do not select the categories with no track registered
from the iPod menu screen. The iPod/iPhone may be
frozen. If the iPod/iPhone is frozen, reset the iPod/
iPhone by following the procedure described in the
instruction manual of the iPod/iPhone.
• Audio may be played back slightly out of
synchronization with video images.
32
] button once for "Repeat

iPod Audio Bluetooth Mode

When your iPod/iPhone have connected via bluetooth
to this unit, you can also enter iPod Audio mode. The
operation is same as the normal iPod Audio mode.