Clarion VX404E Owner's Manual page 40

Switching ON/OFF the AF Function
Turn AF switch to ON/OFF, AF function turns to
ON/OFF. When the AF function is ON, "AF" will be
displayed at the top of the screen.
If the reception of the current broadcast station
deteriorates durably, "AF" indication will blink, and
this unit searches for the same program on another
frequency.
3. REG (Regional Program) Function
When the REG function is ON, the optimum regional
station can be received. When this function is OFF, if
the regional station area is switched as you drive, a
regional station for that region is received.
Note:
This function is disabled when a national station such
as BBC R2 is being received.
The REG function ON/OFF setting is enabled only
when the AF function is ON.
Switching ON/OFF the REG Function
Turn REG switch to ON/OFF, REG function turns to
ON/OFF. When the REG function is ON, "REG" will be
displayed at the top of the screen.
4. PTY (Program Type) Function
This function enables you to listen to a broadcast of
the specified program type when the broadcast starts,
even if the system operates in a mode other than the
Tuner mode.
Some countries do not yet have PTY broadcast.
In the TA standby mode, a Traffic Announcement
broadcast station has priority over a PTY broadcast
station.
Selecting PTY
Press the Program [ ] button, the list of PTY
program is displayed.
Flick and press your desired PTY program button, you
can select PTY program.
Press the Back [ ] button to return to previous
screen.
Setting PTY Standby Mode
Turn PTY switch to ON, PTY standby mode is set and
"PTY" will be displayed at the top of the screen.
Canceling PTY Standby Mode
When "PTY" is displayed on the screen, turn PTY
switch to OFF, "PTY" on the screen goes off, and the
PTY standby mode is canceled.
PTY Seek
Press the Seek [ ] button, seek starts to find the
selected PTY program.
5. Emergency Broadcast
If an emergency broadcast is received, all the function
mode operations are stopped. "Alarm" appears on the
screen and the emergency broadcast can be heard.
Auto Store
The Auto Store is a function for storing up to 6 stations
that are automatically searched in sequentially. If the
number of receivable stations cannot reach to 6, the
previous stored station remains.
1. Press the [FM1/FM2/FM3/AM] button to select the
desired band. (FM or AM)
2. Press the Option [ ] button, and then press the
Start [ ] button to start the Auto Store.
The station with good reception are stored
automatically to the preset list.
Notes:
1. After auto store, the previous stored stations will be
overwritten.
2. The unit has 4 bands, but FM3 and AM can store by
AS function.
Preset Scan
The Preset Scan receives the stations stored in the
preset memory in order. This function is useful when
searching for the desired station in memory.
1. Press the [FM1/FM2/FM3/AM] Button to select the
desired band. (FM or AM)
2. Press the Preset Scan [
Preset Scan.
The head unit starts scanning each station for playing
10 seconds sequentially. But the received station
is not a valid station, the scanning time is only 2
seconds.
3. When the desired station is tuned in, press the
Preset Scan [ ] button again to keep in that
station.
Mode Setting
The DX / Local setting changes the tuner sensitivity in
order to separate closely spaced stations. This feature
is useful in areas that have many radio stations in
close proximity.
1. Press the Local [ ] button to switch to local
tuner sensitivity.
2. Press the DX [ ] button to switch to DX tuner
sensitivity.
] button to start the
VX404E
39