Clock Setup; Security Indicator Setup; [Clock]; [Security] - Kenwood DDX630BT Instruction Manual

Clock Setup

You can adjust the clock time.
1 Display the Clock Setup screen
Touch [ ] > [
(page 55)
2 Setup the Clock
1 1 1
1 Adjusts hours.
2 Adjusts minutes.
[Reset] Sets "00" minute.
Setup examples: 3:00 – 3:29 \ 3:00
3:30 – 3:59 \ 4:00
[Synchronize] Sets the clock time in
synchronization with the time data sent from
the navigation system.
( "OFF")
"OFF"/ "Navigation"
When the synchronized mode is set, the clock
cannot be adjusted manually.
3 Adjust the clock time
] > [System] >

[Clock].

2 2 2

Security Indicator Setup

Setting the security indicator to ON helps to
protect your receiver system against theft.
1 Display the Security screen
>
Touch [ ] [
(page 55)
[SI] Turns the SI function on or off.
If turned "ON", the security indicator on the
front panel flashes when the vehicle ignition is
off. ( "ON")
> >
] [System]

[Security].

English 59