Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Possible cause
The Jet
Clean System
(PT920CC)has not
cleaned the shaver
properly because
the cleaning fluid
in the cleaning
chamber is soiled
or the cleaning fluid
level is too low.
The shaving heads
are damaged or
worn.
Long hairs obstruct
the shaving heads.
You have not
inserted the shaving
heads properly.
The rechargeable
battery is empty.
English
Solution
Clean the shaver thoroughly
before you continue shaving.
If necessary, clean and
refill the cleaning chamber
(see chapter 'Cleaning and
maintenance').
Replace the shaving heads
(see chapter 'Replacing the
shaving heads').
Clean the shaving heads
one by one (see section
'Cleaning the shaving unit
with the cleaning brush'
in chapter 'Cleaning and
maintenance').
Make sure that the
projections of the shaving
heads fit exactly into the
recesses (see section
'Cleaning the shaving unit
with the cleaning brush').
Recharge the battery (see
chapter 'Charging') or
connect the shaver to the
mains.
25