Philips PT925 User Manual page 18

English
18
, The shaver holder automatically moves to its
highest position.
The Jet Clean System is now ready for use.
Using the Jet Clean system
1 Place the shaver without protection cap upside
down in the shaver holder. Push down the
locking lever completely to lock the shaver
into place.
, The battery symbol on the Jet Clean System
goes on to indicate that the shaver is being
charged.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
2 Press the on/off button on the Jet Clean
System to start the cleaning program.
, The battery symbol on the Jet Clean System
goes out.
, During the cleaning program, the cleaning
symbol starts to flash and the shaver is
automatically lowered into the cleaning fluid.
, The shaver automatically switches on and off
several times and moves up and down.
, The cleaning symbol flashes throughout the
cleaning program, which takes approx. 8 minutes.
, After the cleaning program, the battery symbol
on the Jet Clean System goes on to indicate that
the shaver is being charged.
Note: If you press the on/off button of the Jet
Clean System during the cleaning program, the
program aborts and resets. In this case, the cleaning
symbol stops flashing and the shaver returns to its
starting position. The shaver may still be wet and dirty,
because the cleaning program has not been finished.