Philips PT925 User Manual page 19

Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts. The
shaver holder remains in its current position. When you
put the adapter back into the wall socket, the shaver
holder moves to its highest position.
Note: When the fluid level drops below the minimum
level, the cleaning symbol and the 'fluid low' symbol
start to flash and the shaver holder returns to its
starting position.
Cleaning the Jet Clean system
Empty the cleaning chamber and clean it thoroughly
by rinsing it with hot tap water every 15 days if you
use the Jet Clean System daily. Otherwise empty and
clean the cleaning chamber at least once a month.
1 Clean the outside of the Jet Clean System with
a moist cloth.
Never immerse the Jet Clean System in water, nor
rinse it under the tap.
2 Simultaneously press the release buttons on
both sides of the Jet Clean System (A). Then lift
the Jet Clean System off the cleaning chamber
(B).
, The cleaning chamber remains behind.
3 Pour any remaining cleaning fluid out of the
cleaning chamber.
You can simply pour the cleaning fluid down the sink,
this is not harmful to the environment.
4 Rinse the cleaning chamber under a hot tap.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
English
19