Configuring Access Ring Zesr - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (Ethernet Switching Volume)
St- Command
ep
1
ZXR10(config-router)#
<1-2> seg <1-4>{preforward <1-600>[ preup
<0-500>]| role {master |transit}<primary-interface
-name><secondary-interface-name>| { edge-assist
ant | edge-control}<edge-interface-name>}| hello
< 1-6> fail < 3-18>}
2
ZXR10(config)#
<1-2> seg <1-4>
Example
60 Confidential and Proprietary Information of ZTE CORPORATION

Configuring Access Ring ZESR

zesr ctrl-vlan < 1-4094> level
no zesr ctrl-vlan < 1-4094> level
Parameter description
< 1-4094> Area control vlan, indicating zesr area
<1-2> Level of access ring
<1-4> access ring SN, at most 4 access rings in each level.
<1-600> Preforward value, the unit is second. After the discon-
nected port reconnecting, unless ZESR protocol is set or after wait-
ing for preforward time open automatically and the default is 10s.
<0-500> Preup value, the unit is second. After Master or edge-
control detects that loop is up, the status is switched until delaying
preup time. The default value is 0.
<primary-interface-name> <secondary-interface-name> access
ring two interfaces.
< 1-6> Hello value, the unit is second. The default is 1s.
< 3-18> The maximum time dalay that master or edge-control
hasn't received hello packet. The unit is second. The default value
is 3s.
<edge-interface-name> edge node interface
Switch could be in the entry that major-ring and access ring con-
nect. At that time, it can be in major-ring or access ring . There
are two interfaces in major-ring and one interface in access ring .
Switch is named as entry node. The entry node could be edge-as-
sistant and edge-control in access ring and edge-control plays a
general node master role.
1. This example shows how to configure control vlan as 4000, role
as master, level as 1 , seg as 1, ports as gei_2/10 gei_2/10
ZXR10(config)# zesr ctrl-vlan 4000
master gei_2/10 gei_2/20
2. This example shows how to configure control vlan as 4000, role
as edge-assistant, level as 1 , seg as 1, ports as gei_2/1/10
ZXR10(config)# zesr ctrl-vlan 4000
edge-assistant gei_2/1/10
3. This example shows how to configure control vlan as 4000,
level as 1, seg as 1, preforward as 20s, preup as 20s
ZXR10(config)#zesr ctrl-vlan 4000 level 1 seg 1
preforward 20 preup 20
Function
This configures access ring
ZESR.
This cancels the configuration
of access ring ZESR.
level 1 seg 1 role
level 1 seg 1 role