Adding Ports To A Vlan In Batches; Setting The Native Vlan For A Trunk Or Hybrid Port; Setting Vlan Filtering On A Port - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (Ethernet Switching Volume)
Command
ZXR10(config-gei_1/x)#
<vlan-list>[tag|untag]
Command
ZXR10(config-vlanX)#
t-list>
St- Command
ep
1
ZXR10(config-gei_1/x)#
{<vlan-id>|<vlan-name>}
2
ZXR10(config-gei_1/x)#
vlan {<vlan-id>|<vlan-name>}
Command
ZXR10(config-gei_1/x)#
le}
8 Confidential and Proprietary Information of ZTE CORPORATION
� To add a hybrid port into a specific VLAN, use the following
commands.
switchport hybrid vlan

Adding Ports to a VLAN in Batches

To add ports to a VLAN in batches, use the following command.
switchport {pvid|tag|untag}<por
Setting the Native VLAN for a Trunk
or Hybrid Port
An access port belongs to only one VLAN, its native VLAN is the
VLAN to which it belongs. This requires no additional configuration.
Trunk port and hybrid port belong to multiple vlans and they need
to set native vlan. If native vlan is set on port, when one frame
with no vlan tag is received on port, it will be forwarded to the port
belonging to this native vlan. Native vlan of trunk port and hybrid
port is vlan 1 by default.
switchport trunk native vlan
switchport hybrid native

Setting VLAN Filtering on a Port

To set VLAN filtering on a port, use the following command.
ingress filtering {enable|disab
Function
This command adds a hybrid
port to a specified VLAN.
Function
This adds ports to a VLAN in
batches.
Function
This command sets native
VLAN for a trunk port.
This command sets native
VLAN for a hybrid port.
Function
This sets VLAN filtering on a
port.