Quick Setup Instructions; Rear View - JBL ON STAGE 200ID User Manual

·UNPACKING YOUR JBL ON STAGE lM
*200ID
JBL On Stage 20010 Adapters for
iPod/iPhone
aDL
IR remote
r ; - '
,_~; <:l!I~
)11 '"
(i{())j')
' - - /
/----.
,,-~-=::J
Power supply Audio
cable
QUICK SETUP INSTRUCTIONS
*
Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall.
• Next, push the power switch; a green LED will light up, indicating that the unit is powered.
• Auxiliary port (for other portable audio devices): Connect the included audio cable from this port into the headphone jack of
your portable audio device.
REAR VIEW
Power switch
<nPower
Auxiliary
PO~
. , ,
~
Power jack
Q;
1
i !
@
~
Ii
i
~<.
--l
"-------_~
...."
,~"
r,-,
/~:\
'_
) (0) - (0 1
~
- - - -
~., -~ -------
Find the correct adapter for your iPod/iPhone, then firmly place it into the docking
area shown. Next, place your iPod/iPhone into the dock, making sure your iPodl
iPhone is firmly seated. Adjust the volume, using (+) to increase and (-) to decrease.
Press both to mute the JBL On Stage 20010 system. Press either button to unmute.
4 JBLON STAGE 20010 USER GUIDE