iMpOrtant safety instructiOns FCC Statement and Warning Please read the following precautions before use: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
(see Synchronizing with Your iTunes Library, on page 9). JBL OnBeat Air speaker dock. To hear only one source, you will need to turn off the other source (the one you do not want to hear) manually.
Insert the included AC cord all the way into the power supply (if there is more than one AC cord, use the correct one for your region). Then connect the power supply into the JBL OnBeat Air DC In connector and plug it into an AC wall outlet.
Page 5
JBL OnBeat Air you’re setting up in theJBL OnBeat Air Name window and click the Change button. (If you have more than one JBL OnBeat Air we recommend that you set up each unit in turn, leaving the other units powered off.)
OnBeat Air from sleep to on, press any button on the unit or the remote control. as your Wi-Fi router is on and as long as yourJBL OnBeat Air is either on or in the The JBL OnBeat Air will automatically enter the sleep mode whenever no sleep mode.
Page 7
Edit > Preferences > Devices menu. listeninG tO airplay streaMinG auDiO Your JBL OnBeat Air can play audio files or an Internet radio station that is streaming from iTunes 10.1 (or newer) on a networked computer or from an iPod, iPhone or iPad device with iOS 4.2 or later.
Hole for ipad 2 with smart cover rOtatinG tHe DOcK When an iPod or iPhone device is docked in the JBL OnBeat Air, you can rotate Insert Pin Into Locking Hole the dock to the landscape mode. Bend Clip IMPORTANT: You cannot rotate the dock when an iPad device is docked.
PC. If the iPad device charges when it is connected directly to the PC via USB, it will charge while docked on the JBL OnBeat Air. If the iPad device does not charge when it is connected directly to the PC via USB, it will not charge while docked on the JBL OnBeat Air.
JBL OnBeat Air’s Connect button for three seconds. The unit’s status White – single flash JBL OnBeat Air’s video output is on LED will alternately flash white and green to indicate the that JBL OnBeat Air is White – two flashes JBL OnBeat Air’s video output is off in the Connect mode.
Change your computer’s or device’s network connection back to your home Wi-Fi network. upGraDinG sOftware Your JBL OnBeat Air has upgradeable software that lets you take advantage of new features and improvements as they become available. Go to www.jbl.com/ onbeatairupgrade for information about checking your unit’s firmware version and instructions on upgrading to a newer firmware version.
30W (maximum); 0.5W (off) 5-3/4" x 10-13/16" x 5-5/16" Dimensions (H x W x D): (146mm x 275mm x 135mm) Weight: 1.9 lb (0.88kg) * Compatibility at time of writing. For the latest compatibility information, visit www.jbl.com. ** Version 3.0 or higher...
Page 13
• If you’re using an AirPlay source, make sure that the JBL OnBeat Air is joined in the Wi-Fi network. See Configure the JBL OnBeat Air for Wi-Fi Operation, on page 4. JBL OnBeat Air volume controls do not work with •...
Page 14
Replace the audio cable. • Unplug the power supply and connect it to a different AC outlet. Sound comes from only one of JBL OnBeat Air’s speakers: • Make sure that the iPod/iPhone/iPad device is properly seated all the way into the docking connector.