Installations; Wall Mounting (Using The Sr-Mb1(B/W)) - Toa SR-MF1B Operating Instructions Manual

8. INSTALLATIONS

The optional mounting brackets are intended exclusively for the Mechanically Steerable Line Array Speaker
System and permits installations suited to the installation location or applications.
Installation Location
Wall
Ceiling
Note: Attach a safety wire to the bracket mounted on the rear of the cabinet when required. The installation
method and type of wire should follow the local requirements.

8.1. Wall mounting (using the SR-MB1(B/W))

Step 1. Install the bracket bases at the desired positions on the wall.
Step 2. Attach the speaker brackets on the rear of the cabinet with the pre-mounted truss head screws.
Step 3. Hook the speaker on the bracket bases. Slide down the speaker body so that each speaker bracket's
hook fits in the bracket base's slit.
Step 4. Fix the upper bracket base and the speaker bracket with the supplied M4 upset bolt. (Upper bracket only)
Lower bracket
base
12
Application
Flat against the wall
When adjusting horizontal angle up to 90 °
When suspending from a ceiling
Safety Wire
1
Slits
Speaker
bracket
1
Slits
SR-MB1(B/W)
SR-PB1(B/W)
SR-HB1(B/W)
Upper bracket base
2
Hook
2
Hook
Bracket
4
3