Connecting A Synapse Cable Interface; Lost Connection To Host; Mounting The Cradle - Motorola Symbol LS4278 User Manual

1-10 Symbol LS4278 Product Reference Guide

Connecting a Synapse Cable Interface

Refer to the Synapse Interface Guide provided with the Synapse cable for detailed setup instructions.
Symbol's Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate Synapse cable has the built-in intelligence
to detect the host to which it is connected.
To host
Synapse Smart Cable
1. Insert the Synapse adapter cable (p/n 25-32463-xx) into the host port on the bottom of the cradle, as described in
the Cradle on page
2. Align the 'S' on the Synapse adapter cable with the 'S' on the Synapse Smart Cable and plug the cable in.
3. Connect the other end of the Synapse Smart Cable to the host.

Lost Connection to Host

If scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power supply is connected to
an appropriate AC outlet. If scanned data still does not transmit to the host, reestablish a connection with the host:
1. Disconnect the power supply from the cradle.
2. Disconnect the host interface cable from the cradle.
3. Wait three seconds.
4. Reconnect the host interface cable to the cradle.
5. Reconnect the power supply to the cradle, if required.
6. Reestablish pairing with the cradle by scanning the pairing bar code.
The STB4278 does not always require a power supply whereas the STB4208 always requires a power supply.

Mounting the Cradle

For information on mounting the cradle, refer to the documentation included with the cradle.
Figure 1-6. Synapse Cable Connection
1-8.
Synapse Adapter Cable
To Cradle
Connecting