Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from an authorized Epson distributor
(see page 17) or an electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the Y/
Cb/Cr (or Y/Pb/Pr) connectors on your device.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video)
optional component-to-VGA video cable or adapter.
PowerLite S10+
PowerLite X10+/PowerLite W10+
3. You may need to change the
projector's Signal menu to
port on your projector using an
Computer (Component
Video) port
Computer (Component
Video) port
setting in the
Input Signal
(see page 72).
Auto
Setting Up the Projector
37