Connecting An S-Video Source - Epson PowerLite S10+ User Manual

note
If the S-Video cable was not
provided with your video
device, you can purchase one
from an authorized Epson
reseller or from an
electronics dealer; see
page 17.
Setting Up the Projector
36

Connecting an S-Video Source

1. Connect the S-Video cable to the S-Video connector on your
device and the
S-Video
PowerLite S10+
PowerLite X10+/PowerLite W10+
2. If you want to play sound through the projector, see page 40 for
instructions on connecting an audio cable.
When you've finished making connections, see page 43 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
port on the projector.
S-Video port
S-Video port