Loading Documents; Using The Automatic Document Feeder (Adf) (Dcp-7040 Only) - Brother DCP-7030 User Manual

Chapter 2

Loading documents

Using the automatic
document feeder (ADF)
(DCP-7040 only)
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper-clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric with the ADF. Instead use the
scanner glass.
To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
To scan non-standard documents see
Using the scanner glass (Flatbed)
on page 17.
Make sure documents written with ink are
completely dry.
16
a
Unfold the ADF document output
support flap (1) and the ADF support
2
flap (2).
2
b
Fan the pages well.
c
Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller.
d
Adjust the paper guides (1) to fit the
width of your document.
1
2
1