Loading Documents; How To Load Documents; Using The Automatic Document Feeder (Adf) - Brother MFC-L8600CDW Basic User's Manual

3

Loading documents

How to load
documents
You can send a fax, make copies, and scan
from the ADF (Automatic Document Feeder)
and the scanner glass.
Using the automatic
document feeder (ADF)
The ADF can hold up to 35 pages
(MFC-L8600CDW) or 50 pages
(MFC-L8850CDW/MFC-L9550CDW) and
feeds each sheet individually. Use standard
2
80 g/m paper and always fan the pages
before putting them in the ADF.
Document Sizes Supported
Length: 147.3 to 355.6 mm
Width: 147.3 to 215.9 mm
Weight:
2
64 to 90 g/m

How to load documents

IMPORTANT
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
NOTE
• To scan documents that are not
appropriate for the ADF, see Using the
3
scanner glass on page 38.
• It is easier to use the ADF if you are
loading a multiple page document.
• Make sure documents with correction fluid
or written with ink are completely dry.
a
3 Unfold the ADF document support (1).
Lift up and unfold the ADF document
output support flap (2).
3
b
Fan the pages well.
c
3
Stagger the pages of your document
face up top edge first, in the ADF until
the Touchscreen displays ADF Ready
and you feel the top page touch the feed
rollers.
3
3
1
2
37