Loading Documents; How To Load Documents; Using The Adf - Brother mfc-t800 Basic User's Manual

3

Loading documents

How to load
documents
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 20 pages and feeds
each sheet individually. Use paper that is
within the sizes and weights shown in the
table. Always fan the pages before placing
them in the ADF.
Document sizes and weights
Length: 5.8 to 14 in.
(148 to 355.6 mm)
Width: 5.8 to 8.5 in.
(148 to 215.9 mm)
Paper weight: 17 to 24 lb
(64 to 90 g/m

How to load documents

IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
Make sure documents with ink or correction
fluid are completely dry.
18
a
3
3
b
c
3
2
)
3
d
IMPORTANT
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Unfold the ADF Document Support (1).
Fan the pages well.
Adjust the paper guides (1) to fit the
width of your document.
1
Place your document, face down, top
edge first in the ADF underneath the
paper guides until the LCD displays
ADF Ready and you feel it touch the
feed rollers.
3
1