Operating Instructions - Dremel SM20 Operating/Safety Instructions Manual

Hide thumbs Also See for SM20:

Operating/safety instructions manual (60 pages)

Table Of Contents

Table of Contents

Available languages

DM 2610025602 01-13_DM 2610025602 05-12.qxp 1/22/13 10:29 AM Page 11

DUST ExTRACTION

(Optional accessory)

Your tool is equipped with a dust port for dust

extraction. To use this feature, insert dust

port adapter into dust port, attach vacuum

hose into the adapter, then connect the

opposite end of the hose to a shop vacuum

cleaner (Fig. 6).

Thank you for purchasing the Dremel SM20.

This tool was designed to tackle a wide variety

of projects in and around the home. The

Dremel SM20 completes tasks quicker and

more efficiently than a series of other tools that

would be needed to complete a job or project.

This tool is also compact, ergonomic, and cuts

virtually all common materials.

After using your new Dremel SM20 you'll find

that it is the right size tool to get projects done

at just a fraction of the size of a traditional

circular saw. With a full line of accessories the

tool cuts through virtually any common material

in the home- wood, plastic, metal, drywall and

tile. The tool also features two cutting wheel

positions, one position using a standard flat

Hold the tool with both hands

W RNING

while starting the tool, since

torque from the motor can cause the tool to twist.

Start the tool before applying to work and let

the tool come to full speed before contacting

the workpiece. Lift the tool from the work

before releasing the switch. DO NOT turn the

switch "ON" and "OFF" while the tool is under

load; this will greatly decrease the switch life.

V CUUM HOSE

(Not included)

Introduction

wheel for all your typical straight cuts and a

second position for making flush cuts along

flooring or against a wall.

In addition to versatility, the Dremel SM20

provides excellent line of sight for confident,

precise cuts so you will get accurate cuts the

first attempt and avoid wasting time or material.

Visit www.dremel.com to learn more about

what you can do with your new Dremel tool.

This Dremel SM20 tool is intended for straight

cuts in wood, plastic, metal, drywall, fiberboard,

and tile using the applicable accessories

recommended by Dremel.