Table of Contents
Advertisement
Problem
The language in the audio
or on the screen is wrong.
The remote control does
not work.
How do I get subtitles on
or off?
After stopping the player, I
push the play button but
sometimes the DVD starts
where I left off, and
sometimes at the
beginning.
3-104
Recommended Action
Press the main menu
button on the DVD player
or the remote control and
change the audio or
language selection on the
DVD menu.
Point the remote control
directly at the transmitter
window. The batteries
could be weak or put in
wrong. The parental
control button might have
been pressed. (The power
indicator light will flash.)
Press the subtitle button
on the remote control to
go to the DVDs main
menu. Then follow the
screen prompts.
Press the stop button on
the remote control to
resume where the DVD
left off. Press the stop
button twice to start the
DVD at the beginning. If
the power is off and the
DVD is still in the player,
press the play button.
Problem
The DVD is playing but
there is no picture or
sound. The auxiliary
source is running but
there is no picture or
sound.
The audio or video skips
or jumps.
When I return to the DVD
from the system menu,
sometimes it plays from
the beginning and
sometimes from where it
left off.
Recommended Action
Press and release the
SRCE button on the
remote control or the DVD
player to get to auxiliary
input. Check to make sure
that the auxiliary source is
connected to the inputs
properly.
The DVD could be dirty or
scratched. Try cleaning
the DVD.
If the stop button was
pressed once, it resumes
play from where it left off.
If the stop button was
pressed twice, it will start
at the beginning of the
DVD. However, if a
change was made to the
menu the DVD will start
from where it left off, even
if the stop button was only
pressed once.
Advertisement
Chapters
Table of Contents
